MAGNIFIERS & COMPARATORS
 
P-0175 Magnifier Loupe 7X - H  

Pocket type focussing magnifier with three elements achromatic glass lens system, acrylic base to allow light on the object and protective cover for eye lens. Magnification 7X. Accepts 27mm graticules listed below. Also available with linear scale 20mm x 0.1mm.

Product No. Magnification Type
P-0175/1 7X -
P-0175/2 7X with linear scale 20mm x 0.1mm

   
P-0180 GRATICULES  

High quality 27mm dia glass graticules of gtreat stability. Patterns made with low reflection hard chrome depositon imparts high contrast for easy readibility. Printing is on the side of the graticule which makes contact with the object thus minimising the error due to parallex. The following patterns are available:


P-0180/1 Scale No.1  

Angle scales 0° to 80° in 5° divisions and 80° to 90° in 1° divisions. Radius scale 0.1 to 1mm in 0.1mm and 1-10mm in 0.5mm radii. Angle scale 29°, 55°, 60°and 118°. Ten circles on left 0.1 to 1.0 in 0.1mm divisions and ten circles on right from 0.005" to 1/64" dia. Three linear scales: i) 10-0-10mm with 0 to 1mm in 0.05mm divisions, 1mm to 5mm in 0.1mm divisions and 5mm to 10mm in 0.5mm divisions ii) 0 to 0.5" in 0.005" divisions and iii) 0 to 1/8" in 1/64" divisions.

P-0180/2 Scale No.2

Angle scales 0° to 90° in 1° divisions. Radius scale 0.5 to 10mm radii in increments of 0.5mm. Two circles 1.5mm and 3mm dia. Seven circles from 0 to 0.7mm in step of 0.1mm. Linear scale 20mm with 0.1mm divisons. 0.3" X 0.4" grid in 0.025".

P-0180/3 Scale No.3

Graph of 10mm x 10mm divided into 0.5mm squares. Ten circles form 0.1mm to 1mm in 0.1mm increments and three circles of 1.5mm, 2mm and 2.5mm dia. Horizontal scale 10mm in 0.1mm divisions.

P-0180/4 Scale No.4
Protractor scale 0° to 180° numbered every 10°, divided each degree. Radius scales 0 to 10mm in 0.5mm divisions.
P-0180/5 Scale No.5
Protractor scale 0° to 360° numbered every 10°, divided each degree.
 
Copyright © Precision Instrument House - All Rights Reserved